PROLINE Dura-Color Antique Release Agent AR602 Adobe Beige

Click for a Large Photo of PROLINE Dura-Color Antique Release Agent AR602 Adobe Beige
Description PROLINE Dura Antique Release Agent is used as a bond breaker in the stamping process. It is a dust-on powder with water repellant properties that helps prevent wet concrete from adhering to the polyurethane texture mat. PROLINE Dura Antique Release is also used as a coloring agent, leaving a portion of its color, usually darker than the concrete color, imbedded in the low points of the newly textured concrete. This two-color process adds even more dimension to stamped concrete and is referred to as the antique look. Only well-dispersed, alkali friendly, U.V. stable pigments are used in a thorough, carefully monitored blending process. The result is a product that is both reliable in its release capabilities and available in vibrant colors.

* Easy to use powder with stamp release capabilities
* Colored for a two-toned antique look to enhance any decorative concrete surface
* Made with stable, U.V. resistant, streak-free, iron oxide pigments
   
Application & Use Antique Release takes skill and experience to apply, and should only be done by a trained professional. Before application of antique release powder, care should be taken to mask all areas where color is not desired and to protect plants and animals from exposure to product. Dura Antique Release should be broadcast in thin, even coats that overlap just enough to produce a uniform layer on the slab surface free of clumps and thin spots. Release powder can be thrown by hand or, more effectively, with a 6” mason’s brush. Dip the brush in the product and broadcast horizontally in a thin coat parallel to and not more than 24” off the ground. Avoid windy conditions. Do not trowel material into concrete. Stamping can begin as soon as the release agent is applied. If part of the texture mat sticks to the concrete due to an insufficient layer of release, product may be reapplied to trouble spot and stamped again. This will however produce a wrinkled appearance on the finished surface of the trouble spot and should be avoided by applying the product correctly the first time. Allow concrete to cure for at least 24 hours before removal to prevent damage to the new surface. Initially, the excess release powder should be swept using a broom and dust pan. Further removal is accomplished by rinsing with garden hose spray nozzle, light pressure wash, scrubbing, or buffing. Remove only enough to achieve desired effect. Generally, the wetter the concrete surface when the release powder is applied the more color stays in the concrete. Final color that matches color chart can only be achieved by sealing the concrete surface with a quality concrete sealer, such as PROLINE Dura-Seal HG. Product should be contained and disposed of according to local, state, and federal regulations.

Click for Dura Antique Release Technical Data

Click for Dura Antique Release Colors & Information 
Specifications
Item Number: AR602
Color: Adobe Beige. Available in 40 standard colors, with custom colors matched to order.
Size: 30# Pail
Average Coverage: One 30 pound bucket of PROLINE Dura Antique Release covers approximately 1000 square feet.
Weight: 35Lb
Sold By: Each
Product Category More Products Like This 
Documents
 
 
Related Products Title Image Small image of a related product
PROLINE 16" Tamper
Small image of a related product
Ashlar New England Slate
Small image of a related product
Seamless Belgium Slate
Small image of a related product
PROLINE 3/8" Round Textured Touch-up Wheel
 
Accessory Products Title Image Small image of a accessory product
Polyethylene Sheeting - 4 Mil
Small image of a accessory product
Z-Bomb Safety Glasses- Yellow
Small image of a accessory product
Dust Mask - 2 Pack
Small image of a accessory product
Broom - 2-in-1
 
 
BRICK   •  TILE   •  BLOCK   •  SAND   •  GRAVEL   •  CEMENT   •  STEEL   •  STONE   •  LANDSCAPE SUPPLIES   •  PRECAST
FIREWOOD    •   BBQS    •   FLAGSTONE    •   LEDGESTONE    •   WATERPROOFING & DECK SYSTEMS    •  TOOL   •  RENTALS
INDIO
84275 Cabazon Road
Indio, CA 92201-6248
(760) 393-5300
Fax: (760) 393-5302
THOUSAND PALMS
32605 Harry Oliver Trail
Thousand Palms, CA 92276-3501
(760) 404-1500
Fax: (760) 404-1502
SAN BERNARDINO
1485 South Waterman Avenue
San Bernardino, CA 92408-2806
(909) 915-1800
Fax: (909) 915-1802
GARDENA
359 East Gardena Boulevard
Gardena, CA 90248-2815
(310) 436-1400
Fax: (310) 436-1402
LAGUNA NIGUEL (Corp. Hqtrs)
28092 Forbes Road
Laguna Niguel, CA 92677-1288
(949) 347-2100
Fax: (949) 347-2102

WARNING: This Product Contains Chemicals Known To The State Of California To Cause Cancer, Or Birth Defects Or Other Reproductive Harm.
ADVERTENCIA: Este producto contiene componente químicos conocido en el Estado de California como causante de cáncer, defectos de nacimiento y otros daños al sistema reproductor.

Photos on this website are as close to true color as technology and this computer monitor can provide. However, all photos vary somewhat from the true color of the original product. We DO NOT represent that these photos are an exact match of any of our products. You should always base your choice of product on an actual sample.    © 2008-2020 All rights reserved by Sepulveda Building Materials