Stucco - Merlex

Sepulveda Logo
Merlex Stucco has provided high-quality products to the Southern California construction industry since 1963. They are a family owned leading stucco manufacturer with superior quality and personal service.
 
Product Photo
Merlex - Acrylex
Merlex - Acrylex             Top of Page
Product Description: Acrylex is a one component, water-base, non-yellowing acrylic polymer emulsion, used as an internal admixture fro Portland cement mortars, cement plaster, stucco, and concrete mixes.
Color:
Product Photo
Merlex - Add-A-Pak Exterior Stucco Base and Packaged Color System
Merlex - Add-A-Pak Exterior Stucco Base and Packaged Color System             Top of Page
Product Description: The Merlex Add-A-Pak Base and Packaged Color Stucco system uses Color Units, pre-blended, pre-measured formulations of mineral oxide pigment which are individually packaged in 1 lb. (.454 kg) cartons or heat sealed poly bags, to be mixed at the job site with the appropriate Merlex Stucco base.
Color:
Product Photo
Merlex - Bolt Grip Anchoring Compound
Merlex - Bolt Grip Anchoring Compound             Top of Page
Product Description: Bolt Grip is a high strength hydraulic cement compound used for anchoring bolts and other hardware in concrete and masonry. It is easily mixed with water, poured or pressed into the prepared hole and achieves initial set in 10 minutes or less depending on temperature. Bold Grip is a proprietary blend of specialty portland cement, graded aggregates and chemical additives used to control set time and enhance strength.
Color:
Product Photo
Merlex - Concrete Floor Patch
Merlex - Concrete Floor Patch             Top of Page
Product Description: Merlex Concrete Floor Patch is a one-component polymer modified stucco repair mortar for horizontal concrete surfaces. It can be applied to all concrete substrates, above and below grade, interior and exterior. It is a unique proprietary formulation of specialty portland cements, graded aggregates, redispersible co-polymers and additives.
Color:
Product Photo
Merlex - Exterior Pronto Patch
Merlex - Exterior Pronto Patch             Top of Page
Product Description: Exterior Pronto Patch is a fast setting, ready-to-use portland cement based patching compound that requires only clean water for mixing. It achieves initial set within 20 to 30 minutes, and final set within 1 hour. It is excellent for patching around newly installed windows and doors and other minor repairs in portland cement substrates, such as surface cracks, holes, voids.
Color:
Product Photo
Merlex - Fog Coat
Merlex - Fog Coat             Top of Page
Product Description: Merlex Fog Coat is a premium quality, pigmented, bonding cement coating designed for application over portland cement surfaces to achieve color uniformity. Fog Coat is formulated with portland cements, hydrated lime, lime-proof mineral pigments and specific additives.
Color:
Product Photo
Merlex - Hydro Plug 20# Pail
Merlex - Hydro Plug 20# Pail             Top of Page
Product Description: Merlex Hydro Plug is quick setting, hydraulic cement repair mortar which instantly stops running water or seepage leaks in concrete and masonry walls and floors. The Hydro Plug formulation expands as it sets, is non-shrinking, and gains strength when subjected to constant water pressure. Hydro Plug may be applied under water.
Color:
Product Photo
Merlex - Hydro Plug 50# Pail
Merlex - Hydro Plug 50# Pail             Top of Page
Product Description: Merlex Hydro Plug is quick setting, hydraulic cement repair mortar which instantly stops running water or seepage leaks in concrete and masonry walls and floors. The Hydro Plug formulation expands as it sets, is non-shrinking, and gains strength when subjected to constant water pressure. Hydro Plug may be applied under water.
Color:
Product Photo
Merlex - Interior Pronto Patch
Merlex - Interior Pronto Patch             Top of Page
Product Description: Interior Pronto Patch is a fast setting, ready-to-use gypsum based patching compound that requires only clean water for mixing. It achieves initial set in approximately 15 to 20 minutes, and final set within 30 minutes. It is excellent for making repairs to interior surfaces such as gypsum wallboard and plastered walls.
Color:
Product Photo
Merlex - Merleseal
Merlex - Merleseal             Top of Page
Product Description: MerleSeal is a one-coat, penetrating, solvent-free waterbased solution designed to protect above grade stucco, concrete, masonry and natural stone surfaces from moisture-related damage. Its small silicone molecules penetrate deeply and repel liquids while maintaining water vapor permeability.
Color:
Product Photo
Merlex - MicroSeal II
Merlex - MicroSeal II             Top of Page
Product Description: MicroSeal II is a VOC compliant, ready-to-use, state-of-the-art silane/siloxane emulsion designed to seal out water from new or existing unpainted concrete, stucco and masonry surfaces while maintaining vapor permeability.
Color:
Product Photo
Merlex - Mighty Bond
Merlex - Mighty Bond             Top of Page
Product Description: Merlex Mighty Bond re-emulsifiable liquid bonding agent used to provide adhesion of new cementitious materials to existing surfaces. It may also be used as an admixture to fortify concrete mortars, portland cement plaster materials and tile grouts. When Mighty Bond is used as an additive it helps to insure proper curing by retarding moisture loss during hydration.
Color:
Product Photo
Merlex - Poly Prep
Merlex - Poly Prep             Top of Page
Product Description: Merlex Poly Prep is a polymer-modified portland cement base material specifically designed for use as a coating and adhesive for architectural EPS foam shapes. It is the ideal base coat for Merlex Stucco Color Coat Finishes. Merlex Poly Prep is available in standard grade, premium grade, and Green grade. Standard grade is a proprietary blend of Portland cement, redispersible wet bond copolymers, graded aggregates and specific additives. Premium grade provides added polymer for higher bond strength and flexibility. Green grade makes use of 10% post-industrial recycled content for environmentally sensitive projects.
Color:
Product Photo
Merlex - Santa Barbara Finish Color Coat Stucco
Merlex - Santa Barbara Finish Color Coat Stucco             Top of Page
Product Description: Merlex Santa Barbara Finish Exterior Stucco is a premium quality portland cement based color coat finish material designed to achieve a smoother texture reminiscent of the many historical buildings in the Santa Barbara area. It is a proprietary formulation of portland cements, hydrated lime, graded aggregates, mineral oxide pigments, and specific additives.
Color:
Product Photo
Merlex - Skim-Kote
Merlex - Skim-Kote              Top of Page
Product Description: Skim-Kote is a polymer-modified portland cement based concrete finishing material designed to give a smooth, dense surface and superior life compared to gypsum-based fillers.
Color:
Product Photo
Merlex - Super Concrete Patch
Merlex - Super Concrete Patch              Top of Page
Product Description: Merlex Super Concrete Patch is a one-component polymer modified stucco repair mortar for vertical and overhead surfaces. It can be applied to all concrete substrates, above and below grade, interior or exterior. It is a unique proprietary formulation of portland cements, graded aggregates, redispersible copolymers and additives.
Color:
Product Photo
Merlex - Super Hold
Merlex - Super Hold             Top of Page
Product Description: Merlex Superhold is a premium quality quality, ethylene vinyl acatate emulsion which allows the adhesion of gypsum plasters and portland cement materials to existing surfaces. Its unique formulation is high build, film forming and re-emulsifiable. It is ready to use and has a blue tint to make coated areas identifiable.
Color:
© 2004 All Rights Reserved by Sepulveda Building Materials