Natural Stone Thin Veneer - Ledgestone

Sepulveda Logo
Ledgestone is a natural face or snap cut face stone that forms a horizontal dry-stacked, natural-looking wall that appears to be cut directly from the quarry wall. It contains predominantly random rectangular shapes.

Natural face stone has the natural stained face with the stone’s strata showing. It forms a very natural looking wall or veneer for a rustic natural look.

Natural thin veneer is a natural stone cut at a wall depth ranging from 3/4 to 1 inch to 1 1/4 inches as compared to full veneer which has a wall depth of 3" to 5". Its lighter weight and thinner profile provide a number of advantages including textures, shades, economic installation, to architects, homeowners, contractors, and masons.
 
Product Photo
6"x24" Mocha Kreme Panels
6"x24" Mocha Kreme Panels              Top of Page
Product Description: Flat - 624PF-MK-N
L-Corner - 624PCL-MK-N
Color: Mocha Kreme
Product Photo
6"x24" Paradise Valley Panels
6"x24" Paradise Valley Panels             Top of Page
Product Description: Flat - 624PF-PV-N
L-Corner - 624PCL-PV-N
Color: Brown/Grey/Gold
Product Photo
6"x24" White Quartz Panels
6"x24" White Quartz Panels              Top of Page
Product Description: Flat - 624PF-WQ
End - 624PE-WQ
Corner - 624PC-WQ
Color: White Quartz
Product Photo
Autumn Creek Ledge Blended Thin Veneer
Autumn Creek Ledge Blended Thin Veneer             Top of Page
Product Description: This Autumn Creek Ledge Blended thin veneer material is a ledge stone in the standard Autumn Creek colors cut into an 1-1/2" to 2" thick thin veneer and blended with 1/3 Natural Ledge Face (colorful edge), 1/3 Snapped Face (guillotined edge) and 1/3 Seam Face (top of stone). It is sold by the square foot and includes a 1/2" grout joint in the 150 square foot box / pallet. It is also available in corner pieces sold by the lineal foot in a 100 lineal foot box / pallet. Please figure extra material if laying in a dry stack pattern with no mortar joints.

** This thin veneer does not match the full size material unless the full size material is laid using the blend of the natural edge, the snapped back, and the top or bottom side out.
Color: Bluish grays with some golds, tans, and reds
Product Photo
Autumn Creek Ledge Blended Thin Veneer Corners
Autumn Creek Ledge Blended Thin Veneer Corners             Top of Page
Product Description: The Autumn Creek Blended thin veneer corners are cut to an 1-1/2" to 2" thickness with a 90 degree return and matches the Autumn Creek Blended thin veneer flats with the same blend of 1/3 Natural Ledge Face (colorful face), 1/3 Snapped Face (guillotined face) and 1/3 Seam Face (top of stone). It is sold including a 1/2" grout joint in the 100 linear foot box / pallet. Please figure extra material if laying in a dry stack pattern with no joints.
Color: Bluish grays with some golds, tans, and reds
Product Photo
Bryce Canyon Chop Face 2" - 4" Thin Veneer
Bryce Canyon Chop Face 2" - 4" Thin Veneer             Top of Page
Product Description: Bryce Canyon Chopped Face is a ledger that has been chopped and shows the chopped face. There is not as much color in the chopped face.
This product is all natural and is a natural alternative to artificial stone. Natural stone thin veneer that is approximately five times thinner than traditional stone facings. Available in a wide array colors and styles, this product weighs five times less than traditional veneer. That means five times the coverage on your project! Thinner stone translates to less weight and less weight means lower shipping costs, easier installation and no footing requirements. Since it is a natural stone product so it looks beautiful and lasts a lifetime.
Chopped Bryce Canyon comes in the following dimensions: 3"x4", 3"x6", 4"x4", 4"x6", and 4"x8".

Color: Creamy tans and golden browns
Product Photo
Bryce Canyon Chopped Face 3" - 6" Thin Veneer
Bryce Canyon Chopped Face 3" - 6" Thin Veneer             Top of Page
Product Description: Bryce Canyon Chopped face is a ledger that has been chopped and shows the chopped face. There is not as much color in the chopped face.
This product is all natural and is a natural alternative to artificial stone. Natural stone thin veneer that is approximately five times thinner than traditional stone facings. Available in a wide array colors and styles, this product weighs five times less than traditional veneer. That means five times the coverage on your project! Thinner stone translates to less weight and less weight means lower shipping costs, easier installation and no footing requirements. Since it is a natural stone product so it looks beautiful and lasts a lifetime.
Chopped Bryce Canyon is a great product for many construction and landscape applications. The stone is available in a range of heights from 1 1/2 inches to 10 inches. Chopped Bryce Canyon is available in a 1 inch height; 2 to 4 inch height; 3 to 6 inch height and random lengths. Chopped Bryce Canyon is also available in corners.

Color: Bryce Canyon -- Creamy brown
Product Photo
Bryce Canyon Chopped Face 3" - 6" Thin Veneer Corner
Bryce Canyon Chopped Face 3" - 6" Thin Veneer Corner             Top of Page
Product Description: Bryce Canyon Chopped face is a ledger that has been chopped and shows the chopped face. There is not as much color in the chopped face.

This product is all natural and is a natural alternative to artificial stone. Natural stone thin veneer that is approximately five times thinner than traditional stone facings. Available in a wide array colors and styles, this product weighs five times less than traditional veneer. That means five times the coverage on your project! Thinner stone translates to less weight and less weight means lower shipping costs, easier installation and no footing requirements. Since it is a natural stone product so it looks beautiful and lasts a lifetime.

Chopped Bryce Canyon is a great product for many construction and landscape applications. The stone is available in a range of heights from 1 1/2 inches to 10 inches. Chopped Bryce Canyon is available in a 1 inch height; 2 to 4 inch height; 3 to 6 inch height and random lengths.

Color: Bryce Canyon -- Creamy brown
Product Photo
Bryce Canyon Natural Face 2"-4" Thin Veneer
Bryce Canyon Natural Face 2"-4" Thin Veneer             Top of Page
Product Description: Bryce Canyon Natural face 2"-4" is a stained face ledger that matches the Cameron or the Sweetwater color. It is the ledgestone face not the seam face, sorted to 2" to 4" heights. This product is all natural and is a natural alternative to fake stone. Natural stone thin veneer is approximately five times thinner than traditional stone facings. Available in a wide array colors and styles, this product weighs five times less than traditional veneer. Thinner stone translates to less weight and less weight means lower shipping costs, easier installation and no footing requirements. Since it is a natural stone product so it looks beautiful and lasts a lifetime.
Bryce Canyon Natural Face 2"-4" Is also available in corners.
Color: Tan, brown and gold
Product Photo
Bryce Canyon Natural Face 3"-6" Thin Veneer
Bryce Canyon Natural Face 3"-6" Thin Veneer             Top of Page
Product Description: Bryce Canyon Natural face is a stained face ledger. It is the ledgestone face not the seam face.
This product is all natural and is a natural alternative to fake stone. Natural stone thin veneer is approximately five times thinner than traditional stone facings. Available in a wide array colors and styles, this product weighs five times less than traditional veneer. Thinner stone translates to less weight and less weight means lower shipping costs, easier installation and no footing requirements. Since it is a natural stone product so it looks beautiful and lasts a lifetime.

Natural Face Bryce Canyon comes in the following dimensions: 3x4, 3x6, 4x4, 4x6, and 4x8.

Natural Face Bryce Canyon Is also available in corners.
Color: Tan, brown and gold
Product Photo
Carmelita Natural Ledge Thin Veneer
Carmelita Natural Ledge Thin Veneer             Top of Page
Product Description: The Carmelita Natural Ledge thin veneer features the rich colors of tans, grays and browns true to the native earthtones. It has a natural top and bottom with heights ranging from 3" to 6", random lengths, and is available in flats and corners. It can be laid with joints or in a drystack application with no joints (please figure extra material when laying in a drystack pattern). This material is also available in a european castle thin veneer flats and corners.
Color: tan, gray, brown, earthy tones
Product Photo
Chilton Rustic Thin Veneer
Chilton Rustic Thin Veneer             Top of Page
Product Description: Chilton Rustic has more browns and very few light red to burgundy tones in the blend of natural stone. Seam face/weathered edge stone. This product is also available in corners (Item #CRCBB)

This Natural Thin Veneer is a lightweight alternative to full veneer and a higher-quality choice than manufactured stone. Natural Stone Thin Veneer is a natural stone cut at a wall depth ranging from 3/4 to 1 inch to 1 1/4 inches as compared to full veneer which has a wall depth of 3 to 5 inches. Its lighter weight and thinner profile provide a number of advantages including textures, shades, economic installation, to architects, homeowners, contractors, and masons.
Color: brown, red, burgundy
Product Photo
Cinnamon Bark Ledge Thin Veneer Flat
Cinnamon Bark Ledge Thin Veneer Flat             Top of Page
Product Description: The Cinnamon Bark Ledge thin veneer is a ledge with heights ranging from 3/4" to 2-1/2"" in a earth tone of browns, gold's, creams, and a hint of gray. It is saw cut on the back at approximately 1-1/4" thick and comes in random lengths. It is sold by the square foot and is available in corner pieces.
Color: brown with gold and cream
Product Photo
Fond du Lac Country Squire - Natural Thin Veneer
Fond du Lac Country Squire - Natural Thin Veneer             Top of Page
Product Description: This Natural Thin Veneer is a lightweight alternative to full veneer and a higher-quality choice than manufacturered stone. Natural thin veneer is a natural stone cut at a wall depth ranging from 3/4 to 1 inch to 1 1/4 inches as compared to full veneer which has a wall depth of 3" to 5". Its lighter weight and thinner profile provide a number of advantages including textures, shades, economic installation, to architects, homeowners, contractors, and masons.

Color: gray to white
Product Photo
Fond Du Lac Rustic Thin Veneer
Fond Du Lac Rustic Thin Veneer             Top of Page
Product Description: Seam face/weathered edge stone and sawn backs.

This Natural Thin Veneer is a lightweight alternative to full veneer and a higher-quality choice than manufacturered stone. Natural thin veneer is a natural stone cut at a wall depth ranging from 3/4 to 1 inch to 1 1/4 inches as compared to full veneer which has a wall depth of 3" to 5". Its lighter weight and thinner profile provide a number of advantages including textures, shades, economic installation, to architects, homeowners, contractors, and masons.

Color: soft shades of biege, tan and gold
Product Photo
Gatlin Crest Natural Chopped Thin Veneer
Gatlin Crest Natural Chopped Thin Veneer              Top of Page
Product Description: The Gatlin Crest natural chopped thin veneer is a distinctive light colored ledge stone with a blend of creamy tans and golds. It has 4 natural edges and a chopped face with heights ranging from 2" to 8" and lengths ranging from 6"-18". This material can be laid with mortar joints or it can be laid in a drystack pattern. Please figure extra material if laying in a drystack application.
Color: creamy tans and golds
Product Photo
Gold Nugget Gauged Slate Panel 6"x24"
Gold Nugget Gauged Slate Panel 6"x24"             Top of Page
Product Description: Metamorphic rocks altercate from rock that was once igneous or sedimentary due to heat and pressure caused by the earth. Slates are a foliated metamorphic rock with cleavage and grain variations that make slate a great material for indoor and outdoor applications. This product has been cut and placed in a panel for easy application.

Also available in: 16"x16" and random
Color: Gold, Green,Charcoal Gray and Brown
Product Photo
H. Wellington Ashlar Strip Thin Veneer
H. Wellington Ashlar Strip Thin Veneer             Top of Page
Product Description: The H. Wellington ashlar strip thin veneer is an earthtone blend of granite that comes in ledge stone sizes ranging from approximately 4" to 6" in height and are saw cut to approximately 1" - 1-1/2" in thickness with random lengths. This material is available in flats sold by the square foot and corner pieces that are sold by the lineal foot.
Color: creams, golds, grays
Product Photo
Havenwood #2 Seamface 2"-4" Thin Veneer
Havenwood #2 Seamface 2"-4" Thin Veneer             Top of Page
Product Description: The Havenwood 2"-4" is a seamface (top of stone) 2" to 4" tall ledge stone that is saw cut into a natural stone thin veneer with random lengths and ranges in thickness from 3/4" to 1-1/4". It is a perfect blend of tans, browns, and blacks and is laid in a random ashlar pattern. It is available in flats sold by the square foot and corners sold by the linear foot. 150 S/F to a crate of flats, 100 L/F to a crate of corners.
Color: Tans, browns, and blacks
Product Photo
Indian Ledge Flat Thin Veneer
Indian Ledge Flat Thin Veneer             Top of Page
Product Description: Natural face or snap cut face stone forming a horizontal dry-stacked natural looking wall that appears to be cut directly from the quarry wall and contains predominantly random rectangular shapes.

Natural face stone that has the natural stained face with the stone’s strata showing; forms a very natural looking wall or veneer for a rustic natural look.


Color: Light reddish brown with white and gold overtones
Product Photo
Jak Slate Gauged Slate Panel 6"x24"
Jak Slate Gauged Slate Panel 6"x24"             Top of Page
Product Description: Metamorphic rocks altercate from rock that was once igneous or sedimentary due to heat and pressure caused by the earth. Slates are a foliated metamorphic rock with cleavage and grain variations that make slate a great material for indoor and outdoor applications


Also available in: Natural: 12"x12", 16"x16" and 24"x24" / Gauged: 12"x12", 16"x16" and 24"x24" / Ledge Panels / Random Flagging
Color: Gold, Green,Charcoal Gray and Brown
Product Photo
Lompoc #1 Cut Cream Thin Veneer
Lompoc #1 Cut Cream Thin Veneer             Top of Page
Product Description: The Lompoc #1 Cut Cream natural stone thin veneer is special sorted to the very light and creamy color of our regular oatmeal with only 25% or less gray in the blend (shown here with white mortar) is a pitched cut stone with various heights ranging from 4" to 7" and lengths ranging from 4"-16"+ forming a horizontal random lineal pattern. This material is also available in corner pieces sold by the lineal foot.

Color: creamy tans with very little gray
Product Photo
Lompoc Country 2" Seamface Strip Thin Veneer
Lompoc Country 2" Seamface Strip Thin Veneer             Top of Page
Product Description: The Lompoc Country 2" Seamface thin veneer flats are a blend of our oatmeal and scrambled egg color with a creamy tan body and vivid gold, white and gray highlights. Pieces of the natural seam face side are saw cut into 2" heights and random lengths ranging from 6" and longer. It is usually laid dry with no mortar joints so please figure a little extra material if you are laying in a dry stack type application. This can be laid with joints if preferred. Also available in corner pieces.
Color: a blend of oatmeal and scrambled egg
Product Photo
Lompoc Country 4" Seamface Strip Thin Veneer
Lompoc Country 4" Seamface Strip Thin Veneer             Top of Page
Product Description: The Lompoc Country 4" Seamface thin veneer flats are a blend of our oatmeal and scrambled egg color with a creamy tan body and vivid gold, white and gray highlights. Pieces of the natural seam face side are saw cut into 4" heights and random lengths ranging from 6" and longer. It is usually laid dry with no mortar joints so please figure a little extra material if you are laying in a dry stack type application. This can be laid with joints if preferred. Also available in corner pieces.
Color: a blend of oatmeal and scrambled egg
Product Photo
Lompoc Country 6" Seamface Strip Thin Veneer
Lompoc Country 6" Seamface Strip Thin Veneer             Top of Page
Product Description: The Lompoc Country 6" Seamface thin veneer flats are a blend of our oatmeal and scrambled egg color with a creamy tan body and vivid gold, white and gray highlights. Pieces of the natural seam face side are saw cut into 6" heights and random lengths ranging from 6" and longer. It is usually laid dry with no mortar joints so please figure a little extra material if you are laying in a dry stack type application. This can be laid with joints if preferred. Also available in corner pieces.
Color: a blend of oatmeal and scrambled egg
Product Photo
Lompoc Country Ledge Thin Veneer
Lompoc Country Ledge Thin Veneer             Top of Page
Product Description: This Lompoc County Ledge natural stone thin veneer is blended 1/3 Country Ledge Natural Face, 1/3 Pitched Face and 1/3 Seam Face. It is sold by the square foot and includes a 1/2" grout joint in the 150 square foot box / pallet. It is also available in corner pieces sold by the lineal foot in a 100 lineal foot box / pallet. Please figure extra material if laying in a dry stack pattern with no mortar joints.

** This thin veneer does not match the full size material unless the full size material is laid using the blend of the natural edge, the snapped back, and the top or bottom side out.

Color: Cream base with gold, red and some blue with contemporary gray streaks
Product Photo
Lompoc Gray Blend Ashlar Strip Thin Veneer
Lompoc Gray Blend Ashlar Strip Thin Veneer             Top of Page
Product Description: The Lompoc Gray Blend Ashlar Strip is a natural stone thin veneer in the standard oatmeal gray blend color with a pitched cut face, untrimmed ends, and saw cut on the top and bottom. It comes in various heights ranging from 1" to 4" and lengths ranging from 6"+ forming a horizontal random lineal pattern. It is usually laid dry with no mortar joints so please figure a little extra material if you are laying in a dry-stack type application. This can be laid with joints if preferred. This material is also available in corner pieces.

Color: Creamy tan with contemporary gray hearts or streaks
Product Photo
Lompoc Ledge Cream Thin Veneer
Lompoc Ledge Cream Thin Veneer             Top of Page
Product Description: The Lompoc Ledge cream natural stone thin veneer is a pitched cut stone in the standard oatmeal color with most of the gray sorted out and comes in various heights ranging from 2" to 4" and lengths ranging from 4"-16"+ forming a horizontal random lineal pattern. This material is also available in corner pieces.
Color: Creamy tan with very little gray
Product Photo
Lompoc Ledge Gray Blend Thin Veneer
Lompoc Ledge Gray Blend Thin Veneer             Top of Page
Product Description: The Lompoc Ledge natural stone thin veneer in the standard gray blend color (shown here with dark tinted mortar) is a pitched cut stone with various heights ranging from 2" to 4" and lengths ranging from 4"-16"+ forming a horizontal random lineal pattern. This material is also available in corner pieces.

Color: Creamy tan with contemporary gray hearts or streaks
Product Photo
Lompoc Natural Ledge Blended Thin Veneer
Lompoc Natural Ledge Blended Thin Veneer             Top of Page
Product Description: This material is blended 1/3 Natural Ledge Face, 1/3 Snapped Face and 1/3 Seam Face. It is sold by the square foot and includes a 1/2" grout joint in the 150 square foot box / pallet. It is also available in corner pieces sold by the lineal foot in a 100 lineal foot box / pallet. Please figure extra material if laying in a dry stack pattern with no mortar joints.

** This thin veneer does not match the full size material unless the full size material is laid using the blend of the natural edge, the snapped back, and the top or bottom side out.

Color: Light cream to golden color especially when wet.
Product Photo
Lompoc Premier #1 Cut Thin Veneer
Lompoc Premier #1 Cut Thin Veneer             Top of Page
Product Description: The Lompoc #1 Cut natural stone thin veneer in the standard gray blend color (shown here with white mortar) is a pitched cut stone with various heights ranging from 4" to 7" and lengths ranging from 4"-16"+ forming a horizontal random lineal pattern. This material is also available in corner pieces sold by the lineal foot.

Color: Creamy Tans with Gray Hearts or streaks
Product Photo
Misty Peak Natural Ledge Thin Veneer
Misty Peak Natural Ledge Thin Veneer             Top of Page
Product Description: The Misty Peak Natural Ledge thin veneer is a blend of grays and earthtones ranging from light golds to dark browns. It has a natural top and bottom with heights ranging from 3" to 6", random lengths, and is available in flats and corners. It can be laid with joints or in a drystack application with no joints (please figure extra material when laying in a drystack pattern). This material is also available in a european castle thin veneer flats and corners.
Color: gray body with gold and brown overtones
Product Photo
New England Blue Range Ashlar Strip Thin Veneer
New England Blue Range Ashlar Strip Thin Veneer             Top of Page
Product Description: The New England Blue Range ashlar strip is a thin blue gray natural edge thin veneer strip with 1" to 3" heights and random lengths. It is usually laid with very tight joints, so please figure a little extra material if you are laying in a dry stack type application. This can be laid with joints if preferred. Also available in corner pieces.
Color: Blue gray
Product Photo
New England Full Range Ashlar Strip Thin Veneer
New England Full Range Ashlar Strip Thin Veneer             Top of Page
Product Description: The New England Full Range ashlar strip is a thin olive green to dark brown natural edge thin veneer strip with 1" to 2" heights and random lengths. It is usually laid with very tight joints, so please figure a little extra material if you are laying in a dry stack type application. This can be laid with joints if preferred. Also available in corner pieces.
Color: Olive greens to dark browns
Product Photo
Rainier Natural Chopped Ledge
Rainier Natural Chopped Ledge              Top of Page
Product Description: The Rainier natural chopped ledge is a thin veneer with a blend of creams and golds, saw cut to approximately 1" in thickness with natural edges on all four sides. Heights will range from 1"-8" and lengths will range from 4"-18". This material is available in flats sold by the square foot and corners sold by the lineal foot. It can be laid with or without a mortar joint. Please figure extra material if laying in a dry stack application.
Color: creams and golds
Product Photo
Rocky Mountain Honey Ledge Thin Veneer
Rocky Mountain Honey Ledge Thin Veneer              Top of Page
Product Description: The Rocky Mountain Honey Ledge thin veneer is a charcoal gray colored quartzite with some rusty gold tones when it is laid with the natural stained face out. This material can be laid with joints, or it can be laid in a dry stack application when preferred. Please figure extra material if laying in a dry stack application with no mortar joints.
This material is available in flats with150 SF per crate and corners with 80 LF per crate.
Color: Gold, tan, charcoal
Product Photo
Rocky Mountain Silver Ledge Thin Veneer
Rocky Mountain Silver Ledge Thin Veneer              Top of Page
Product Description:
Color:
Product Photo
Saint Barts 4" Thin Veneer
Saint Barts 4" Thin Veneer             Top of Page
Product Description: The Saint Bart's 4" Thin Veneer is a creamy bodied stone with deep gold and brown overtones. Heights are cut and sorted to 4" tall, and it is saw cut to approximately 1-1/4" in thickness, making it about 12-13 lbs per square foot. Perfect for any veneer application. Also available in corner pieces.
Color: Cream with deep golds and browns
Product Photo
Saint Barts Natural Chopped Thin Veneer
Saint Barts Natural Chopped Thin Veneer             Top of Page
Product Description: The Saint Bart's Chopped Thin Veneer material is a creamy bodied stone with deep gold and brown overtones, ranging in height from 4" to 8" with random lengths, and saw cut to approximately 1-1/4" in thickness, making it about 12-13 lbs per square foot. Perfect for any veneer application. Also available in corner pieces.
Color: Cream with deep golds and browns
Product Photo
Sienna Country Squire Flats
Sienna Country Squire Flats             Top of Page
Product Description: This product is all natural and is a natural alternative to fake stone. Natural stone thin veneer is approximately five times thinner than traditional stone facings. Available in a wide array colors and styles, this product weighs five times less than traditional veneer. Thinner stone translates to less weight and less weight means lower shipping costs, easier installation and no footing requirements. Since it is a natural stone product so it looks beautiful and lasts a lifetime.

Sienna country squire ledge is also available in corners.
Color: Tan, Brown and Gray
Product Photo
Starlite Creek Quartz Ledger Thin Veneer
Starlite Creek Quartz Ledger Thin Veneer              Top of Page
Product Description: Starlite Creek Quartz Ledger Thin Veneer.

Flats & Corners available.

The Starlite Creek Quartz Ledge is more of a river rock look than a ledge stone look. It can be laid with or without grout joints.
Color: Starlite
Product Photo
Starlite Quartz Ledger Thin Veneer
Starlite Quartz Ledger Thin Veneer              Top of Page
Product Description: Starlite Quartz Ledger Thin Veneer.

Flats & Corners available.
Color: Starlite
Product Photo
Starlite Quartz Ledger Thin Veneer
Starlite Quartz Ledger Thin Veneer              Top of Page
Product Description: Starlite Quartz Ledger Thin Veneer.

Flats & Corners available.
Color: Starlite
Product Photo
Sydney Peak Ledger 1" Thin Veneer
Sydney Peak Ledger 1" Thin Veneer             Top of Page
Product Description: The Sydney Peak Ledger is a charcoal color with a hint of green blended with some golden tones, sorted and saw cut into 1" height strips. It It is usually laid with very tight joints, so please figure a little extra material if you are laying in a dry stack type application. This can be laid with joints if preferred. It is sold in crates of 150 square feet for flats and 100 lineal feet for corner pieces. It is also available in a 1" to 3" and a 3" to 5" height in both flats and corners.
Color: charcoal green with some gold tones
Product Photo
Sydney Peak Ledger 1"-3" Thin Veneer
Sydney Peak Ledger 1"-3" Thin Veneer             Top of Page
Product Description: The Sydney Peak ledger in the 1" to 3" thin veneer flats are a greenish charcoal color with some accents of golds and creams, sorted to the 1" to 3" heights and saw cut on the back to approx 1-1/4" thick. This material can also be laid with no joints.
It is sold by the square foot and includes a 1/2" grout joint in the 150 square foot box / pallet. It is also available in corner pieces sold by the lineal foot in a 100 lineal foot box / pallet. Please figure extra material if laying in a dry stack pattern with no mortar joints.

Color: Greenish charcoal wtih rusty golds and creams
Product Photo
Sydney Peak Ledger 3"-5" Thin Veneer
Sydney Peak Ledger 3"-5" Thin Veneer             Top of Page
Product Description: The Sydney Peak ledger in the 3" to 5" thin veneer flats are a greenish charcoal color with some accents of golds and creams, sorted to the 3" to 5" heights and saw cut on the back to approx 1-1/4" thick. This material can also be laid with joints if preferred.
It is sold by the square foot and includes a 1/2" grout joint in the 150 square foot box / pallet. It is also available in corner pieces sold by the lineal foot in a 100 lineal foot box / pallet. Please figure extra material if laying in a dry stack pattern with no mortar joints.

Color: Greenish charcoal wtih rusty golds and creams
Product Photo
Whispering Pines Ledge Thin Veneer
Whispering Pines Ledge Thin Veneer             Top of Page
Product Description: Whispering Pines is a rustic natural face thin veneer that has colors ranging from blue’s and greys to highlights of browns and greens. It is available in flat and corner pieces sold by the square foot and the lineal foot. Heights are from 1" to 3" with lengths from 6" to 20", saw cut on the back at 1" to 1-1/2" in bed depth.
100SF per pallet (flats)
50LF per pallet (corners)


Color: blue’s and grey to highlights of browns and greens
© 2004 All Rights Reserved by Sepulveda Building Materials